PA-950 Shock Detector

Application

The 950 safe protector is designed for security applications on metallic cabinets, cashboxes, safe and metallic doors, It can also be applied successfully to protect concrete walls of bank depositories and other premises requiring high security protection level.

The 950 safe protector is installed directly on the protected  surface and reacts to the frequency spectrum of vibrations caused by surface breaking, cutting, and heavy knocking by grinders, electric arc welders, and oxyacetylene torches. It also reacts to knocking, filing and drilling on the protected surface.

Since effective operation is contingent on close contact between the detector and the protected surface, this surface must be well cleaned prior to installation, the vibration detector should then be tightly attached to the safeguarded surface with 3 screws.

Technical:

Supply voltage:10-16VDC

Current consumption: Stand-by:12mA Alarm:16mA

Adjustable sensitivity:30%,40%,50%,70%,100%

Diameter of protected area:2.5meters

Alarm relay output: NC,28V/150mA

Tamper output: NC.24V/0.2A

Alarm LED indication: Red LED flash 3 seconds

Temp range: -20 to 50 degree

Maximum humidity: 95% at 25 degree

Dimension: 109*64*23mm

Net weight: 165 grams